Guides

How to Jail Break and Unlock IPone 3G, 3Gs & IPod Touch OS 3.1.2

Method 1 ——————————–

What do you need:
blackra1n RC3 . Click on the Mac/Windows logo to download it
Blacksn0w can unlock :
iPhone EDGE iPhone 3G iPhone 3Gs
iPhone 3G/3Gs

How to do it:

1. Download blackra1n for mac/Windows using the above link

2. Make sure you are on iTunes latest version and update your device for OS 3.1.2

3. After completing the update you’ll get an un-jailbroken device amp; now you need to jail break it using method given below

4. Turn off your iDevice and close iTunes

5. Run blackra1n. You will see a single window with just one button “Make It Ra1n”. Click on it…

6. It will say “waiting for device”. When you see this message , turn on your iDevice

7. When your iDevice will be recognized, you will see a new message saying ” entering recovery ” . In those seconds, the program will launch a completely automated process that will put the iDevice in recovery mode and then run the Jailbreak and install Blackra1n on the iDevice.

8. You will see an image of GeoHot and also get this pop-up messages

9.Now just wait for your iDevice to reboot and the jailbreak was successful

10. After reboot you will notice that you got the blackra1n icon on your springboard. Tap it, to install Cydia and blacksn0w to unlock your iPhone. You’re done.

iPhone 2G/EDGE

How to do it:

1. Download blackra1n for mac

2. Turn off your iDevice and close iTunes

3. Load blackra1n. You will see a single window with just one button “Make It Ra1n”. Click on it…

4. It will say “waiting for device”. When you see this message , turn on your iDevice

5. When your iDevice will be recognized, you will see a new message saying ” entering recovery ” . In those seconds, the program will launch a completely automated process that will put the iDevice in recovery mode and then run the Jailbreak and install Blackra1n on the iDevice.

6. You will see an image of GeoHot and also get this pop-up messages

7. Now just wait for your iDevice to reboot and the jailbreak was successful

8. After reboot you will notice that you got the blackra1n icon on your springboard. Tap it, to install Cydia.

9. Load Cydia, update the essentials and then search for BootNeuter.

10.Start BootNeuter and make sure it is configured like this:

11. Now you need to tap on the “Flash” button at the top of your screen. That’s it. Enjoy your unlocked 3.1.2 baseband 05.11.07 iPhone EDGE

EXPLANATION :

1. Bootloader Version

The iPhone EDGE has two bootloaders
3.9 which is the oldest bootloader and was used on FW 1.1.x 4.6 the latest bootloader used on the new firmwares
2. Neuter

A bootloader that uses the Neuter, allows us to have full control over our baseband. So all the restrictions applied by the bootloader are gone.

3. FakeBlank

All the iPhone hackers, want to be able to run a series of payloads directly in the rebooting process. They can use BootNeuter and choose to activate the FakaBank Bootloader.

4. Unlocking

BootNeuter lets us unlock the baseband. Basically this will unlock your iPhone EDGE, so make sure you turn it ON.

NOTE: DO NOT interrupt the flashing process. It may take a while.

NOTE:IF you need to restore your iDevice in order to update to 3.1.2 or you just want to restore, DO NOT restore from backups. Set the iPhone as a new device.

Method – 2 ————————————

What you need?

RedSn0w 0.9 beta 3 [ Mac or Windows ] Firmware 3.1.2 [ iPhone 2G, iPhone 3G, iPhone 3Gs, iPod Touch , iPod Touch 2G ] (Google for “Download OS 3.1.2 for iPod Touch 2G”) Bootloaders 3.9 and 4.6 [iPhone 2G ONLY]
This Jailbreak does not work for iPod Touch 3G

How to use RedSn0w?

Download RedSn0w and OS 3.1.2 and place them in a folder on your desktop. Make sure iTunes is up to date, and restore your iDevice with 3.1.2 FW. Load RedSn0w and browse for the 3.1.2 firmware you downloaded and placed in a folder on your desktop RedSn0w will check if you chose the correct firmware ( IPSW ) and it will start patching it This step is for iPhone 2G ONLY! Otherwise , skip this step. If you also want to unlock your iPhone 2G, select “Cydia” and “Unlock” . Now attach the two bootloaders. If you just want to jailbreak your iPhone, skip this. Now you can choose to install Cydia and custom boot and recovery logos. If you don’t need custom logos, just choose to install Cydia Connect your iPhone, and follow the steps on the screen to put your iDevice in DFU mode. Your iDevice will reboot and now you got a fully functional jailbroken iDevice. To unlock
1. Open Cydia and install new source by going to Manage menu.

The source URL for the blacksn0w is http://blackra1n.com

2. After blackra1n source install, search for Blacksn0w app.

Click Install Button and after installation reboot your device.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Most Popular

To Top